BLIS

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

      I doubt that 'this has ever been done. The CAN bus you mentioned is present in the pre-FL MK4 too (think it is the MS-CAN) but the issue is that beside the radar sensors behind the rear bumper you need a Central Junction Box and the respective door modules that support BLIS. Even if you would get the hardware it might require a re-programming of modules and I don't know whether 'this is available.
      So it may end up in a situation where you have spent a lot of time and money only to find out that it simply can't be done.
      OH
      Die schnellste Verbindung zwischen zwei Punkten ist eine Gerade.
      Die von den meisten Fahrern am wenigsten beherrschte Strecke zwischen zwei Geraden ist eine Kurve.
      Was das heißt?

      Geradeaus sind wir alle schnell !!!

      Achtung! Beiträge können Ironie enthalten! Ironie unterliegt nicht der Kennzeichnungspflicht!

      Meine Beiträge in diesem Forum geben ausschließlich meine persönlichen Meinungen und Wissensstände wider.
      As far as i know, the BLIS system contains the following components:
      - (UNSHURE! Maybe only needed for lane assistent) BLIS RADAR SYSTEM CAMERA FRONT: BS7T-19H406-AF
      - BLIS RADAR SENSOR RIGHT: BS7T-14D599-BE
      - BLIS RADAR SENSOR LEFT: BS7T-14D453-BE
      - BLIS MODULE: AM2T-14C689-AG
      - BLIS-enabled PDM/DDM (Driver/Passenger door module with BLIS-LED output): 9G9T-14K533-E?, 9G9T-14K534-K?
      - Door wiring loom with BLIS-LED connectors: BG9T-14A584 and BG9T-14K138
      - BLIS mirror glasses for both sides: ????
      - The BCM must support the BLIS feature. It's part number should end with at least "-DL"

      Because BLIS is a security relevant assistent, i'm pretty shure that IF it is connected to any CAN it would be HS-CAN and not MS-CAN. Retrofit is possible, there are several videos/threads about it. Reprogramming the BCM and doormodules, add the missing wires to the mirror LED may also save some bucks. But be shure to end up about 300-400£ only for the components. Don't know what it means to mount the parts.

      BLIS is neither a security nor a safety but an optional comfort feature. BLIS does not need a camera only the radar sensors in the back. According to the wiring diagrams for my car these are communicating via their own CAN bus with the Central Junction Box /BCM and the CJB with the door modules via the MS CAN bus.
      OH
      Die schnellste Verbindung zwischen zwei Punkten ist eine Gerade.
      Die von den meisten Fahrern am wenigsten beherrschte Strecke zwischen zwei Geraden ist eine Kurve.
      Was das heißt?

      Geradeaus sind wir alle schnell !!!

      Achtung! Beiträge können Ironie enthalten! Ironie unterliegt nicht der Kennzeichnungspflicht!

      Meine Beiträge in diesem Forum geben ausschließlich meine persönlichen Meinungen und Wissensstände wider.
      Thank you for the replies. I have just fitted the DAB module to my MCA nx nav and the Ford camera and module. Both work perfectly. Just got me thinking I wonder if BLIS would be supported. I had a play with elm config and turned BLIS on in central configuration. I have facelift convers+ and I can now turn on/off BLIS in menu. Although I get a message saying BLIS malfunction. This is probably just because I have facelifted cluster though and nothing else, (BCM) recognises it.
      I fitted MK4.5 power child locks to the rear, along with new switch and new rear door modules. Added the extra wires and enabled it in elm config. It doesnt work though. I don't think my CAN "knows" what it is, so can't switch it on/off
      The can bus does not matter if it knows things or doesn't.
      Your BCM (Body Control Module) just can't process the configuration, 'cause these modules weren't available at that time.
      I think your BCM just can't handle it. Maybe an update could help.

      But I am not an expert...
      Lieben Gruß
      Sammy

      stick
      Sind die BLIS Module (Radareinheiten) eigentlich von Mondeo, SMax, Kuga und Focus untereinander kompatibel? Eine Nachrüstung würde mich schon reizen, auch weil ich das System aus Sicherheitsgründen für sinnvoll halte. Für den Mondeo werden die selten angeboten, aber für andere Fordmodelle. Optischen sehen die gleich aus (Hersteller, Stecker) könnten sich also eher nur in der Firmware unterscheiden?!...